Technical data and information on hydraulic lifting machine MOD. SI-300 for lifting, moving and laying railway points, for railway maintenance
Engine
| Type |
HATZ |
| Cycle |
DIESEL |
| Injection |
DIRECT |
| Engine size |
2574 |
| N° cylinders |
3 IN LINE |
| Cooling |
BY AIR |
| Power |
35.9 KW (49 HP) a 3000 g/1' |
| Specific consumption |
245 g/KWh a 2500 g/1' |
| Engine torque |
170 Nm a 2000 g/1' |
Do you want to know more?
WRITE US NOW
Translation
hydraulic, with fixed displacement engine that transmits the motion to the rail wheels by means of a mechanical chain drive.
Max. speed
20 Km/h.
Structure
this consists of an electrically-welded framework made of composite beams, tubular section beams for the extending of the horizontal columns and rail-extractors, and of two vertical side-columns. The hydraulic lifting cylinders of the side columns are protected by the telescopic tubular system. The structure houses: the diesel engine, hydraulic pumps, hydraulic distributors with control levers, hydraulic oil tank and fuel tank, battery, drive engine with complete mechanical transmission, four rail-wheels, driving seat with appropriate safety devices. The telescopic lifting columns are independent and can be extended vertically by 1800+660 mm. The horizontal supporting columns are independent and can be extended laterally by 1000mm in both directions. Lastly, the rail-extractor horizontal supporting columns are both independent and extendable by 530 mm. The rail-extractors are also equipped with a mechanical device for adjusting the gripping height for the various types of rails.
Additionally, the new lifting machine is able to perform longitudinal movements (of up to 160 mm) for the purpose of centring the laying position of the track panel or the points.
Gauge
the machine can be set up with any kind of gauge.
Lifting capacity
30,000 KG (30 Ton.)
Total mass
5,600 KG (5.6 Ton.)
Certifications
the VAIACAR SI-300 type system, constructed following the current Community Directives, has been CE certified and is in compliance with all the applicable standards.
